Understanding sunseashell® 46-Inch Fabric Specifications

Overview of the sunseashell® 46-Inch Fabric

The sunseashell® 46-inch fabric is identified by its finished width, base construction, surface treatment, and performance characteristics. A finished width of 46 inches indicates the usable fabric dimension after manufacturing and finishing processes. This measurement is important when estimating material requirements, planning panel layouts, or calculating production yields.

Because the fabric carries a trademarked name, its exact composition and intended application should be confirmed through the manufacturer’s current technical data sheet. Specifications can vary depending on the selected base fabric, coating system, production lot, or finishing method.

Key Physical and Performance Measurements

Finished square yard weight, expressed in ounces, describes how much the completed fabric weighs over one square yard. This figure helps indicate handling characteristics, portability, coverage, and overall material density. It is especially useful when comparing fabrics designed for similar uses.

Finish or coating details explain whether the material has been treated for water resistance, durability, dimensional stability, or another performance requirement. Tongue tear strength, measured in pounds, reflects resistance to tearing from a pre-cut or concentrated tear point. Grab tensile strength, listed in pounds, measures the force needed to break the fabric under a specified test method. Both values help assess how the material may perform during installation, handling, and use.

Interpreting Shrinkage and Ordering Data

The hydrostatic measurement is commonly associated with resistance to water penetration under pressure. A higher result generally indicates stronger resistance, although the test standard and reporting unit should always be reviewed before making comparisons.

Shrinkage factor, described as approximate, indicates the expected dimensional change after exposure to specified conditions such as heat, moisture, or washing. Fabric users should allow for this factor during pattern development and cutting. Before placing a large order, verify the current width, weight, coating, strength values, hydrostatic result, and shrinkage information with the supplier, along with the applicable test methods and tolerances.